JK TFT LCD Screen for iPhone XS Max with Digitizer Full Assembly

LCD screen functions
Specification:
1. Display type: INCELL FHD
2. Resolution: 1242 x 2688
3. Color temperature (k): 6900
4. Brightness (cd/m2): 650
5. IC removable: NOT required
6. Real tone: Yes
Features:
1. Touch control 120 Hz
2. Original color display
3. High wear resistance
4. Wide color gamut display
5. Low power consumption
About the product
1. Replacement Incell LCD display + touch screen digitizer assembly for iPhone XS Max.
2. Replace your defective or unusable part with a new one.
3. Make your device look more refreshing than ever.
4. Fits perfectly and works.
5. Each part has been checked before shipment and is in good condition.
6. Professional installation is highly recommended. Once the screen is installed, we will no longer assume any responsibility.
Notes before installation
1. Tips 1: Test before installation
Do not remove any protective films or labels during testing. Be aware of the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components in the phone.
Be sure to wear safety goggles and avoid cutting your fingers on broken glass.
2. Tips 2: Simulated Testing
The screen replacement is a very fragile product. We strongly recommend testing before installation. Please simulate testing, that is, disassemble the mobile phone (motherboard + LCD or screen), connect and replace the audio cable, power it on, test completed. If the test is OK, please install it. If it doesn't appear, please contact us at the first time. And please do not force the installation in the mobile phone. Once the screen is installed, we will not assume any responsibility.
3. Tip 3: Do not bend the cable too much
Be careful not to bend the LCD cable too sharply. If it is bent more than 90 degrees, the display will go black.