JK In-Cell TFT LCD Screen for iPhone 13 with Digitizer Full Assembly

Before installation instructions
Tips 1: Test before installation
Do not remove any protective film or labels when testing. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside the phone.
Make sure you wear eye protection and be careful not to cut your fingers with the glass shards.
Tip 2: Simulate tests
The screen replacement is a very fragile product, we strongly recommend test before installation. Please simulate test, that is, cell phone apart, (mainboard + LCD or screen) audio cable connected and new replacement, power on, test finished. If test OK, please install it. If it can not display, please contact us at the first time. And please do not force installation in the cell phone, we are not responsible once the screen is installed.
Tip 3: Do not bend the cable too much
Please make sure the LCD cable is not bent too much. Bending more than 90 degrees will result in a black display.
About the product
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for iPhone 13
2. Replace the old, broken, cracked, damaged
3. Make your device look more refreshing than ever
4. Fully fit and functional
5. Each item has been checked before shipping and is in good condition
6. Professional installation is highly recommended. We are not responsible once the screen is installed