GX OLED LCD Screen for iPhone 11 Pro Digitizer Full Assembly with Frame (Black)

LCD screen functions
1. Display area: 5.8 inches
2. Brightness: 580 cd/m² <+-30 cd/m²>
3. Contrast: 1,000,000:1
4. Polarizer: Full view
5. Front glass: 9H front glass, dust and fingerprint resistant
6. Touch sensitivity: 1:1, original experience in 44 channels
7. Color temperature: 7300 K
8. Screen resolution: 2436 x 1125 - 458 ppi
9. Operating temperature: -25-65 degrees Celsius
10. Mounting thickness: 1:1, like original
11. True Tone: Yes
12. Readability in sunlight: Yes
13. Low power consumption: Yes
14. 3D Touch (Force Touch): Yes
15. Automatic brightness adjustment: Yes
16. IC: COG
About the product
1. Replacement LCD Screen + Touch Screen Digitizer with Frame for iPhone 11 Pro
2. Replace your defective or unusable item with a new one
3. Make your device look more refreshing than ever
4. Fits perfectly and works
5. Each item has been checked before shipping and is in good condition
6. Professional installation is highly recommended. We assume no responsibility once the screen is installed
Notes before installation
Tip 1: Test before installation
Do not remove any protective films or labels during testing. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components in the phone.
Make sure you wear eye protection and be careful not to cut your finger on the glass fragments.
Tip 2: Simulate tests
The screen replacement is a very fragile product. We strongly recommend conducting a test before installation. Please simulate the test, that is, disassemble the mobile phone (motherboard + LCD or screen), connect and replace the audio cable, power it on, and the test is completed. If the test is OK, please install it. If it doesn't appear, please contact us at the first attempt. And please do not force the installation in the mobile phone. We will not assume any responsibility once the screen is installed.
Tip 3: Do not bend the cable too much
Please be careful not to bend the LCD cable too sharply. Bending it beyond 90 degrees will result in a black display.