For Samsung Galaxy S22+ 5G SM-S906B OLED LCD Screen Digitizer Full Assembly with Frame (Black)

Notes before installation
Tips 1: Test before installation
Do not remove any protective film or labels when testing.Please pay attention to the problem of static electricity.
Before attempting any repair, make sure you ground yourself using an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside the phone.
Make sure you wear eye protection and be careful not to cut your fingers on the glass shards.
Tips 2: Simulate tests
Replacing a screen is a very fragile product.We strongly recommend doing a test before installation.Please simulate the test, that is, mobile phone apart, (motherboard + LCD or screen), connected audio cable and new replacement, power on, test finished.If the test is OK, please install it.If it can not display, please contact us at the first time.Please do not force the installation in the mobile phone.We will not take any responsibility once the screen is installed.
Tips 3: Do not bend the cable too much
Please make sure the LCD cable is not bent too much. Bending more than 90 degrees will result in a black display.
About the product
1. LCD Display + Touch Screen Digitizer Assembly with Frame Replacement Part
2. Replace your defective or unusable item with a new one
3. Make your device look more refreshing than ever
4. Fully fit and functional
5. Each item has been checked before shipping and is in good condition
6. Professional installation is highly recommended. We will not take any responsibility once the screen is installed